WPS or Wi-Fi Protected Setup lets one add WiFi devices to the network of the Netgear router without the use of network name and password. If you would like to perform Netgear wireless router setup without those frustrating routerlogin credentials, then you should use the WPS button on Netgear router. To know about the process in detail, it is recommended that you walk through this blog.
For your information, while executing the process, if you find yourself stuck at any point, remember that you can contact our technical experts for help.
How to Use WPS Button on Netgear Router for Setup?
1. Choose the Ideal Location
Start the process by choosing the perfect location for your Netgear wireless router. To meet the criteria of the so-called perfect location, keep the following points in mind:
- There should be a safe distance between the router and transmitting appliances like baby monitors, washing machines, microwave ovens, refrigerators, treadmills, and televisions. The reason being, such appliances emit electromagnetic waves which are not good for the signals of your networking device.
- The router should be kept far from reflexive surfaces like mirrors and fish tanks so that its signals do not bounce off of the surfaces and cause technical issues.
- Thick concrete walls also hold the capability to mess with the signals of your router by blocking them. Thus, do not place the router near concrete walls.
Now that you have wrapped your head around the first setup step, follow the next one.
2. Plug in the Netgear Router
Look for an available wall outlet in your home and plug your Netgear wireless router into it. Make sure that the wall outlet is not damaged. Also, if the router model that you are using came with a power cable, then ensure that it does not have cuts. Once assured, press the power button and let the LED glow. In case, it does not glow, then it is a cause for worry. In that case, take our advice and contact our team of professionals for help. They will not provide you with the reasons why the LED is not glowing but also the instant solution through which it can reflect as was always supposed to.
3. Locate the WPS Button
The next step in line is to locate the WPS button on the Netgear wireless router. By the way, the location of the WPS button on Netgear router totally depends on the model that you own. This means that on some routers, the button will be located at the bottom whereas on some, it will be found along with the other buttons like the power button, reset button, etc.
4. Press the WPS Button
As soon as you find the WPS button, press it. It is recommended that you do not rush through the process. Pressing the WPS button on Netgear router too quickly might stop you from making use of it at all. Remember, precaution is better than cure. Proceeding further; press the WPS button on the existing modem. Hold on for some time.
5. Change the Router Location
After waiting enough, change the location of your Netgear wireless router. While doing so, keep one thing in mind, i.e. the distance between the router and the modem should neither be too much nor less. Otherwise, the signals emitted from them will find nearly impossible to get transmitted properly. And if that happens, then you performing setup via the WPS button on Netgear router will go to waste. And you wouldn’t want that, would you?
Verdict
The WPS method is the easiest way through which one can configure the Netgear wireless router. Hopefully, you were able to make full use of the WPS button on Netgear router for the setup process, on the off chance, you came across issues while executing the process, it is recommended that you ping our technical experts.
Relax! You do not have to worry about the time at which you should contact them. We can say this with surety because our team of professionals has been trained in such a way that regardless of the time at which the user contacts them, they will be at his or her service. Taking this into consideration, contact them right away via chat or email.