So, your Netgear router is blinking in green color, but you’re left without any internet? A solid green light on your router generally means it is working fine. But a green light that keeps on blinking and does not turn solid, is an indication that something is wrong. No worries, let’s help you get rid of this Netgear router blinking free but no internet issue.
Why is the Green Light Blinking?
A blinking green light usually means your router is trying to connect to the internet. Once the connection is established the light turns solid. But if it continues to blink then it could be due to a few different reasons. You’ll also face issues to access Netgear router login page. We suggest you try your hands on the troubleshooting solutions that we have listed below to figure out the problem and get it fixed.
Quick Fixes to Try First
Let’s start with some easy troubleshooting steps. These quick fixes might do the trick without any hassle.
Restart Everything
- Turn off the router and modem. Unplug them from the power.
- Wait a bit. Give it about 30 seconds.
- Plug them back in. Start with the modem and then the router.
- Check the light. See if the green light becomes solid and if your internet comes back.
Check All Cables
You should check these cables:
Ethernet cables – Make sure they’re all plugged in snugly. None of them is damaged or loose.
Power cables – Doublecheck they’re connected and switched on and that the cables are not broken.
Talk to Your Internet Provider
Call your internet provider. Sometimes, the issue is on their end. Ask if there are any problems in your area.
Find a Good Spot for Router
Put your router in a good spot. Place it somewhere central, away from walls and other electronics devices to prevent interference.
If That Didn’t Work, Let’s Get a Bit Deeper
If the easy fixes didn’t help, don’t worry. We’ll help you try some more advanced steps.
1. Update Your Router
Now that the problem is not fixed and you still see the green light blinking on your Netgear router. We suggest you check for firmware updates. But as there’s no internet you can’t login to Netgear router. In that scenario you can use Anywhere access to log in remotely.
- Go to router settings now.
- Log in to the Nighthawk app using Anywhere Access. You should have the feature enabled to log in remotely to the router.
- Check for firmware updates.
- If an update is pending, follow the instructions to install it on the router.
2. Reset Your Router
If the firmware updates have not helped you get rid of the Netgear router blinking green light then you should now reset it to the factory settings. To reset your router, do this:
- Find the reset button on the router. It’s usually a small button on the back or bottom.
- Hold it down after pressing it for about 10 seconds.
- Release the button and the router resets to the default values
Now set you router up again. After resetting, you’ll need to go through the setup process all over again. You can use 192.168.1.1 Netgear router default IP to log in and set I up or use the URL routerlogin.net.
In Conclusion
Dealing with Netgear router blinking green but no internet issue isn’t fun. But you can handle it by making use of the solutions that we have listed here. Start with the simple stuff, and if you need to, move on to the more advanced fixes. We expect that we have helped you resolve the problem and make your router up and running.