If you want to enable Netgear Smart Connect on your wireless router, then this post is written for you. Here, we are going to explain every bit of the Smart Connect feature so that you can make the most of it and take your internet-usage experience to another level. So, don’t waste any more time and read on.
What Exactly is Netgear Smart Connect?
Before you learn about the steps to enable the feature, let’s first shed light on what exactly is Netgear Smart Connect. Well, this feature helps in balancing your 5GHz WiFi connections into two different radio bands: the 5GHz radio 1 band as well as the 5GHz radio 2 band. Your Netgear WiFi router uses Smart Connect to choose the perfect radio band for your device and make you experience the best WiFi performance.
For the Smart Connect feature to work, both 5GHz radio bands should use the same wireless network name (SSID) and password. Moving on, follow the step-by-step guidelines mentioned below and learn how to enable Smart Connect on your home router.
Before You Get Started
Ensure the following things before getting down to the steps to enable the Netgear Smart Connect feature on your wireless router:
- Your Netgear router should be receiving an adequate power supply from the wall socket.
- Make sure that the Ethernet cable maintaining a connection between your Netgear WiFi router and the existing modem is not worn out or damaged from anywhere.
- If the firmware of your Netgear wireless router is not updated to the latest version, access the 192.168.1.1 default IP and do the needful.
Steps to Enable Netgear Smart Connect on Router
Launch an Internet Browser
Once you’ve assured the aforementioned things, switch on your computer or laptop and open an internet browser (Google Chrome, Mozilla Firefox, Apple Safari, or Microsoft Edge) on it.
Whatever internet browser you choose, just make sure that it is running its updated version. Otherwise, you might run into technical issues while trying to access the routerlogin administrative page.
Log in to Your Netgear Router
In the address bar of your internet browser, type routerlogin.net and click Enter. You will get welcomed by the Netgear WiFi router login page. Fill in the default username and password of your router into their respective fields and click Log In.
Note: If you are not certain regarding the default admin details of your Netgear WiFi router, then it is recommended that you either refer to the user manual or get in touch with our technical experts. They have the solutions to all your router-related problems.
Locate the Smart Connect Option
Once you’ve successfully logged in to your Netgear WiFi router, head over to the Settings option and click Wireless Settings. As soon as the Wireless setup page will appear on the screen of your system, follow the below-outlined steps:
- Look for the Netgear Smart Connect option.
- Once found, enable it by selecting it.
- Click Apply.
- Now, give the changes made by you a couple of seconds to get saved.
If you follow these guidelines carefully, you’ll surely be able to enable the Netgear Smart Connect feature on your Netgear wireless router.
Summing Up
Our guide to enable Netgear Smart Connect on the WiFi router ends here. We hope that the steps mentioned in this post will help you enable this amazing feature on your device. On the off chance, you get stuck at any point while doing so, don’t hesitate to reach out to our well-versed technical experts. They are available for you at every hour of the day.