Online gaming lovers all across the globe have performed Netgear router setup in their homes because of the advantages that it provides. However, what good is a wireless router when it has to cause LED-related issues? Don’t understand what we are talking about? No problem. Ask yourself whether you have been seeing the LED on your Netgear router flash yellow recently. If you have, then now the answer to your question might be quite clear. So, before you start worrying, let us tell you that our experts are here to assist you. In this post, some of the tested and proven hacks have been mentioned through which you will be able to put an end to the Netgear router yellow light issue. Thus, read on.
[Fixed] Netgear Router Yellow Light Issue
Before you get down, we would like to tell you that the followings hacks can be implemented even if you are facing the Netgear N300 wireless router yellow light or Netgear AC1200 yellow light issue.
a. Consider Rebooting the Router
If you are a regular technical device user, then you might be well aware of the benefits of rebooting. It makes the device up and running within minutes, isn’t it? Well, maybe, something similar needs to get done to your Netgear wireless router.
To reboot your device, follow the below-mentioned steps given by us:
- Take out the power cord connecting your router to the wall socket.
- Hold on for some time.
- Now, you need to do the complete opposite of the first step.
Have you finished rebooting your Netgear wireless router? Is the Netgear router yellow light issue still in the picture?
Well, fret not. Did you forget that we have more hacks to help you out?
b. Check the Ethernet Connection
If your Netgear wireless router is not properly connected to the existing modem, it’s no shocker why you are struggling with the Netgear router yellow light issue.
Therefore, check the Ethernet cable you have used for the connection between your devices. Any damages found? Yes? What are you waiting for then? Get up, step out of your house, and buy a new cable right away.
c. Keep Signal Interference at Bay
While setting up your Netgear wireless router, did not check the location at which you are placing it? Did you unintentionally keep your device in a room filled with appliances? Well, that is unfortunate.
But, thankfully, we have a hack that can help you rectify your mistake, i.e. relocating your router. Just make sure that while the relocation is happening, the new room that you have chosen for your Netgear router is not filled with either transmitting appliances or electronic devices.
After following this hack, check if the Netgear router yellow light has stopped being a pain in the head. If you still need aspirin for your headache, then you shouldn’t stop reading this post.
d. Reduce Distance Between Devices
How far have you kept your Netgear wireless router and the existing modem? Hard to calculate? Well, it means that the distance is too much. And there, you have found another reason behind the Netgear router yellow light issue.
To troubleshoot it, cut the distance between your devices from 100 to 30. The reason why we said 30 is because placing your devices too close can also be a disadvantage. Thus, take the necessary action.
e. Set Up Your Router Properly
If you are still stuck with the Netgear router yellow light issue, you need to set up your device again. Why? Well, perhaps, you haven’t configured your Netgear router properly, that is why.
Performing Netgear router setup is possible via two methods. They are as follows:
- Using the Manual method
- Via the Nighthawk app
You are free to any method that you like. Both will give you the results you are looking for.
Need More Help?
With the last hack, we are wrapping up our guide based on troubleshooting the Netgear router yellow light issue. Although the hacks given above will definitely stop the LED on your device from blinking yellow, on the off chance, it does not, contact our tech team.
Relax. Stop worrying about the time at which you should ping them. Do you know why we are saying this? Because they are always available to help out Netgear router users.